Average Ready Reckoner rate for a flat in Save area
₹3,140 per sq ft
₹33,800 per sq m
- Zones
- 2
- Applicable from
- 1 Apr 2025
Save Ready Reckoner rate per sq ft by property type
Residential (flat)
₹3,140 per sq ft
₹33,800 per sq m
1 zone
Open land (plot)
₹460 per sq ft
₹4,950 per sq m
Range by zone ₹279–₹641
Office
₹3,614 per sq ft
₹38,900 per sq m
1 zone
Shops
₹4,218 per sq ft
₹45,400 per sq m
1 zone
Industrial
₹3,614 per sq ft
₹38,900 per sq m
1 zone
Zone wise Ready Reckoner rate in Save area
Ready Reckoner for Save area has 2 zones. They are described in words, not plot numbers, so type your road, society or landmark in the box below to find yours.
No match? Take the survey number from your 7/12 extract (satbara utara) to the Sub-Registrar office, and they can tell you the zone code to type here.
Still not sure? The Thane Sub-Registrar office can confirm which zone it will use for your property. Our guide on finding your Ready Reckoner zone shows how to match your documents to a zone. If you think the value is too high, you can ask for it to be fixed under section 31 of the Maharashtra Stamp Act before you register. If the Collector fixes a higher value under section 32A, you can appeal within 60 days under section 32B.
| Zone | Area covered | Flat₹/sq m | Open plot₹/sq m | Office₹/sq m | Shop₹/sq m | Industrial₹/sq m |
|---|---|---|---|---|---|---|
| 37/130-21B | Sawe in the village all properties survey numbers including the village settlement | 33,800 | 6,900 | 38,900 | 45,400 | 38,900 |
| 37/131-21B | Sawe in the village all properties survey numbers including the village settlement - undeveloped per sq m. | — | 3,000 | — | — | — |
— means the schedule publishes no rate for that zone.
Stamp duty and registration charges for a flat
Inside the Pune, Pimpri-Chinchwad, Thane and Nagpur municipal corporations you pay 7% stamp duty and a 1% registration fee, capped at ₹30,000, on your agreement value or Ready Reckoner value, whichever is higher. Councils and villages have different rates. Here is the minimum for a 1,000 sq ft flat at 7%.
- Ready Reckoner value
- ₹31.4 lakh
- 1,000 sq ft × ₹3,140 per sq ft
- Stamp duty (7%)
- ₹2,19,800
- 5% duty + 1% LBT + 1% metro cess
- Registration fee (1%)
- ₹30,000
- Capped at ₹30,000
- Minimum you pay
- ₹2,49,800
- If your price is higher, you pay more
- Women buying a home on their own pay 1% less stamp duty: 6% instead of 7%.
If your agreed price is more than ₹31.4 lakh, use the stamp duty calculator for Save area to see what you will pay on your actual price.
Buying a resale flat
New and resale flats in the same zone have the same Ready Reckoner rate. At the average ₹3,140 per sq ft here, a 1,000 sq ft resale flat has a Ready Reckoner value of about ₹31.4 lakh, the least the government accepts when the sale is registered. Ready Reckoner guidelines lower the value of the building as it gets older and raise it on higher floors in buildings with a lift, so two resale flats in one zone can differ a little. The price you agree with the seller is often higher, and banks lend on their own valuer's report, not on Ready Reckoner rate.
Save Ready Reckoner rate FAQs
What is Ready Reckoner rate in Save per sq ft?
₹3,140 per sq ft (₹33,800 per sq m) for a flat.
Is stamp duty in Save charged on Ready Reckoner rate or my agreement price?
On your agreement price, unless Ready Reckoner value is higher. A 1,000 sq ft flat at Save's flat rate has a Ready Reckoner value of about ₹31.4 lakh. If you pay more than that, duty is on your price.
Has Ready Reckoner rate in Save changed for 2026-27?
No. The 2026-27 rates are the same as 2025-26, so Save's flat rate stays at ₹33,800 per sq m. The last change was on 1 April 2025.
Is Ready Reckoner rate in Save on carpet or built-up area?
Built-up area. The ASR guidelines convert carpet area with a factor of 1.1 or 1.2, depending on the area and year. So a 1,000 sq ft carpet flat counts as about 1,100 to 1,200 sq ft built-up. At Save's average ₹3,140 per sq ft, that is roughly ₹34.5 lakh to ₹37.7 lakh.
What is Ready Reckoner rate for shops in Save?
About ₹4,218 per sq ft (₹45,400 per sq m) on average, around 1.3 times the flat rate. Offices average ₹38,900 per sq m.
Do women pay less stamp duty in Save?
Yes, on homes bought only by women, with no male co-buyer: duty is 1% lower. That saves about ₹31,400 on a ₹31.4 lakh Ready Reckoner value.
Ready Reckoner rates in other Thane taluka areas
Panchpakhadi
Thane · flat ₹13,620/sq ft, 334% higher than Save
Chendani
Thane · flat ₹12,477/sq ft, 297% higher than Save
Versave
Thane · flat ₹3,131/sq ft, about the same
Bale
Thane · flat ₹3,205/sq ft, similar rate
Tardi
Thane · flat ₹3,112/sq ft, about the same
Uttan
Thane · flat ₹3,233/sq ft, similar rate
See all 212 areas on the Thane Ready Reckoner rate page, or compare Save with another area side by side.
Source: Annual Statement of Rates (Ready Reckoner) 2026-27 for Thane, Department of Registration and Stamps, Government of Maharashtra. igrmaharashtra.gov.in